NVR & DVR General Guides
Setup, formatting, and password reset walkthroughs for Viper NVR & DVR systems. Tap a card to open the guide.
-
Click start and login.
-
Click start again and Settings.
-
Select Motion under "Camera"
-
Under the enable collumn, switch the drop down to "On" for each camera requiring motion, then select apply (bottom right).
Note. By default, motion alerts are turned on for Superlive plus and the recorder will record motion.
When adding multiple IP cameras to NVR and the bandwidth is exceeded (preventing you from adding more)
-
Login to NVR, select Settings > Recording, Schedule Recording & Event Recording, both bitrate need to be lowered. (lower to 2048Kbps on each camera).
Note: replace the image paths above with the uploaded screenshots once available in the Magento media library.