NVR AND DVR
Step-by-step video walkthroughs and setup guides for AI features, PTZ tracking, and IP camera installation. Tap a card to open the guide.Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
Step 8
Step 9
Step 10
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
Step 8
Step 9
Step 10
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
Step 8
Step 9
Step 10
-
- With PTZ camera connected to PoE port of NVR, connect laptop to the same router wifi or via LAN cable. If no router in use, connect laptop direct to LAN port on NVR.
-
Open Microsoft Edge and login into the NVR using its IP address (Found under Network settings > TCP/IP on NVR).
-
Once logged into NVR, browse to Function Panel > Camera:
Click on the "Settings" cog at the camera
Login into the camera (Default login: User: Admin Password:123456)
-
Log into the recorder and navigate to Settings → AI Event → LPR. Select the required LPR camera.
-
Select the Area tab and draw the vehicle detection area along with the license plate detection zone.
-
Adjust the License Plate Exposure slider if lighting conditions are too bright or too dark.
-
Captured number plates can be viewed later under Intelligent Analytics.