Home / Knowledge Base
Video Guide: Network settings + App setup
Video Guide: How to Format a hard drive
Enable Basic Motion Detection
- Click Start and login.
- Click Start again and Settings.
- Select Motion under "Camera".
- Under the Enable column, switch the drop down to "On" for each camera requiring motion, then select Apply (bottom right).
Note: By default, motion alerts are turned on for Superlive Plus and the recorder will record motion.
Adjust NVR Bandwidth
When adding multiple IP cameras to NVR and the bandwidth is exceeded (preventing you from adding more)
- Login to NVR, select Settings > Recording, Schedule Recording & Event Recording, both bitrate need to be lowered (lower to 2048Kbps on each camera).
Popular Articles
Frequently viewed documentation and technical guides.