Browse by Category or Brand
Select a hardware brand or category to explore specific guides and manuals.
Hub 1 | Hub 2 |
Wireless Zone: 150-channel wireless peripherals (6 sirens, 64 wireless key fobs) Wireless Distance: Up to 2,000 m (6,561.68 ft) in an open space Connectivity: Ethernet/Wi-Fi (2.4G) Carrier Frequency: 868.0 MHz–868.6 MHz IP Camera: 4 Battery life: 12 hour standby Power Supply: 12 V DC, 1.5 A | Wireless Zone: 150 channels wireless peripherals (6 sirens, 64 PIR cameras (only 8 indoor PIR cameras), 64 key fobs, 8 keypads and 4 repeaters) Wireless Distance: Up to 2,000 m (6,561.68 ft) in an open space Connectivity: Ethernet/Wi-Fi (2.4G) Carrier Frequency: 868.0 MHz–868.6 MHz IP Camera: 4 Battery life: 12 hour standby Power Supply: 12 V DC, 1.5 A |
ARC3000H-W2 (868) — Wi-Fi only ARC3000H-FW2 (868) — 4G/3G/2G, Wi-Fi, Ethernet ARC3000H-GW2 (868) — 2G, Wi-Fi, Ethernet | ARC3800H-W2 (868) — Ethernet + Wi-Fi ARC3800H-FW2 (868) — Ethernet + Wi-Fi + Cellular |
Add Hub to VTH
- Press Setting icon on VTH.
- Select Device Manager
- Enter project password, press OK.
- Press "Add Equip" and search for hub.
- Enter username and password for hub, added successfully.
View and Delete Hub
- Press Setting icon on home screen.
- Choose Device Manage, enter project password.
- Press small hub icon in top right corner.
- Show hub state/delete hub.
View Device Info
- Press hub icon to enter hub page.
- Partition area — See all created areas and peripherals within those areas.
- Devices section — See all peripherals added to hub.
Wiring
Relay
Event Linkage Wiring
Set Output Devices
(Wire the relay accordingly)
- Open DMSS, press three dots to right of Hub, then Device Details.
- Scroll to the Wireless Relay, select three dots and Device Details.
- Select pencil icon at top right and Output Type.
- Choose Normally Open or Normally Closed.
Note: When a trigger signal is generated, the output state of the relay will change from "closed" to "open" or "open" to "closed". - Select Output Mode.
Note: Bistable will change state upon an electric trigger. Pulse will allow you to set a duration once the trigger is activated.
Event Linkage Control
- Open DMSS, press three dots to right of Hub, then Device Details.
- Scroll to the Wireless Relay, select three dots and Device Details.
- Select pencil icon at top right and select "Scenario Settings" and "Create Scenario"
- Enter Scenario Name, choose Linkage Area/Linkage Mode and Save.
Schedule Control
- Scroll down to relay, press three dots to right and select Device Details.
- Press pencil icon top right, select Scenario Settings.
- Select Scheduled Linkage Scenario.
- Enter Scenario Name, click Enable, set time and repeat date, click Save.
Manual Control
- Scroll down to relay, press three dots and Device Details to see status of relay.
- From here you can select Disable or Enable.
Control Via Panic Button
- Select panic button, press three dots — Device Details.
- Press pencil icon top right.
- Select Operation Mode and Control.
- Choose Scenario Settings.
- Select Create Scenario and select relay to link.
- Set scenario name, choose control method and Save.
Control Via Keyfob
- Select keyfob button, press three dots — Device Details.
- Press pencil icon top right.
- Select Operation Mode and Control.
- Choose Scenario Settings.
- Press Create Scenario and choose relay.
- Make scenario name, select control method and Save.
How to Arm/Disarm
- Open DMSS, press three dots to right of Hub and select Device Details.
- In Hub dashboard, press relevant button to arm/disarm hub.
Add Device/Peripheral to DMSS
- Open DMSS, select "+" top right.
- Scan QR code on Alarm Hub.
- When prompted, change Dip switch from STA to AP (ensure blue LED on hub is blinking)
- Configure username and password to initialize.
- Select the AP Wi-Fi network to connect to.
- Change Dip switch back to STA.
- Wait for app to connect to router then add device name for Hub.
- Enable DST
Add Device/Peripheral
- Select "+" under Peripheral section on DMSS.
- Scan QR code on back of device.
- Give device name and set area.
- Flip switch on device from off to on, indicator blinks green and then adds successfully.
Add Card
(Requires keyboard to be added first)
- Select "+" under Peripheral section on DMSS, then select Add Card.
- Swipe over keyboard to wake (buttons will illuminate)
- Hold card to bottom of keyboard, wait for green tick on DMSS.
Add IPC
(Note: IPC needs to be Dahua and must already be initialized via PoE switch on same LAN as Hub)
- Select "+" under Peripheral section on DMSS, then select Add IPC.
- Find IPC through online search/IP address.
- Give device a name and enter device password.
Delete Device
- On the device list screen, press three dots at top right of each device
- Press Device Details.
- Scroll down, press Delete
Note: Even when deleting Hub from app, the devices are still paired with hub and can still be armed/disarmed from keypad. To delete hub and unpair all devices, factory default with pin using reset button.
Popular Articles
Frequently viewed documentation and technical guides.